Aerosim 747-200

 

review

The Boeing 747 is a long-range, wide body commercial passenger jet aircraft. The Boeing 747-200 is an improved 747-100, but with more powerful engines and higher takeoff weights.

Aerosim is a Japanese developer of various MS Flight Simulator products. Many classic aircraft are available in special packages. The 747-200B/200C/200F are part of the Classic Liners Vol. 1 package. Other aircraft in the package are: Boeing 747-100, 747-300, 727-100, 727-200 and 737-200Adv. Also, scenery of the old Osaka International Airport is included in this package.

The package contains a few liveries for each version: Northwest Orient, Lufthansa and British Airways for the 747-200B, SAS Scandinavian Airlines for the 747-200C and for the freighter version Flying Tigers, Lufthansa Cargo and British Cargo. The liveries are not of the highest quality, but it's still nice. Unfortunately, there are not many 3rd party liveries available on websites like AVSIM. This might be due to the small number of people who own Aerosim aircraft or maybe because there are too many good freeware alternatives.

The flight dynamics are not bad, although the climb power seems a bit too much for a classic 747. The autopilot is doing its job without problems. The engine sounds (all versions including the -300 version are using the 747-100 sound) are not that good, but there are many freeware sound sets available on websites like the AVSIM Library.

Those who are looking for highly detailed systems simulation should look elsewhere, because the 2d panel is quite simple and not all systems are simulated. Same for the virtual cockpit, it looks nice, but the textures are low quality and not all buttons are clickable. On the other hand, a simple virtual cockpit is good news for your frame rate. And if your computer is very slow, you can use the wingview model or the no-vc model for even better frame rate.










--

Added on: 07/25/2008 • Views: 575 • Downloads: 12 • Rating: 3.00 (1 Votes)
 

the good

  • Frame rate friendly
  • Nice classic 747 model
  •  

    the bad

  • The liveries are not of the highest quality
  • Not many liveries available
  • Too much climb power for a classic 747
  • Simple panel and virtual cockpit
  • The engine sound is not that good
  •  

    specifications

    License
    : Payware
    Price Indication
    : $35.00 (Classic Liners Vol 1)
    Panel
    : Yes
    Virtual Cockpit
    : Yes
    Wingview
    : Yes
    Sound
    : Yes
    Developed for
    : FS2004
    Compatibility
    : FS2004 FSX
    Wingflex
    : Yes, gear compression based
    Landing gear
    : Realistic
    Rudder effect
    : Realistic
     

    Links

    notes

    NOTE FOR FSX USERS: This aircraft is fully compatible with FSX (only the smoke effects are not and the strobe lights may not work correctly). Please follow the instructions below if you want to use this aircraft in FSX:

    1. First, find the original installer. Unzip the archive to a temporary folder. The folder that contains the file 'install.exe' should also contain a sub-folder called 'CL1'. Go in that folder and you'll see the file 'Aircraft.exe' and these sub-folders: Effects, Flights, fonts, gauges, scenery and texture. First, double click (ute) on the 'Aircraft.exe' file and wait until the aircraft files are extracted. After that, you should see a new folder called 'Aircraft'.

    2. Move or Copy the contents of the 'Aircraft' folder to the SimObjects\Airplanes folder of FSX (e.g. C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\ ).

    3. Move or Copy the contents of the 'Effects' folder to the main effects folder of FSX (e.g. C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\Effects\ ).

    4. Move or copy the contents of the 'Fonts' folder to the main fonts folder of FSX (e.g. C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\Fonts\ ).

    5. Move or copy the contents of the "Gauges" folder to the main gauges folder of FSX (e.g. C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\Gauges\ ).

    6. Move or copy the contents of the "Texture" folder to the main texture folder of FSX (e.g. C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\Texture\

    NOTE: The instructions above are for the whole package, so you don't have to do this again for the other aircraft in the package. However, the instructions below are valid for the 747-100 and 747-200 models only.

    7. Since the smoke effect appears not aligned with the aircraft, it's better to disable it. Open the file 'Aircraft.cfg' of the 747-100 model with notepad (e.g. C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\AS_B747100_CL\Aircraft.cfg).

    Find these lines:

    [SMOKESYSTEM]
    smoke.0= -107.8, -6.900, -69.08,fx_as_747ol_exo
    smoke.1= -76.8, -10.400, -38.90,fx_as_747il_exo
    smoke.2= -76.8, -10.400, 38.90,fx_as_747ir_exo
    smoke.3= -107.8, -6.900, 69.08,fx_as_747or_exo

    Place '//' for each line like this:

    //[SMOKESYSTEM]
    //smoke.0= -107.8, -6.900, -69.08,fx_as_747ol_exo
    //smoke.1= -76.8, -10.400, -38.90,fx_as_747il_exo
    //smoke.2= -76.8, -10.400, 38.90,fx_as_747ir_exo
    //smoke.3= -107.8, -6.900, 69.08,fx_as_747or_exo

    Save the file and repeat the steps for the 747-200 versions.

    8. OPTIONAL: Thumbnail image for the aircraft selection list.

    Right-click on the images below and choose "Save Picture As..." or "Save Image As...", browse to the folder \Program Files\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\AS_B747200B_CL\ and choose between the texture folders. The text below the image shows you the right texture folder to save the thumbnail image in. (e.g. \AS_B747200B_CL\TEXTURE\ ).


    save to AS_B747200B_CL\TEXTURE\


    save to AS_B747200B_CL\TEXTURE.1\


    save to AS_B747200B_CL\TEXTURE.2\


    Right-click on the image below and choose "Save Picture As..." or "Save Image As...", browse to the folder \Program Files\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\AS_B747200C_CL\TEXTURE\ and save the thumbnail.jpg image.


    save to AS_B747200C_CL\TEXTURE\


    Right-click on the images below and choose "Save Picture As..." or "Save Image As...", browse to the folder \Program Files\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\AS_B747200F_CL\ and choose between the texture folders. The text below the image shows you the right texture folder to save the thumbnail image in. (e.g. \AS_B747200F_CL\TEXTURE\ ).


    save to AS_B747200F_CL\TEXTURE\


    save to AS_B747200F_CL\TEXTURE.1\


    save to AS_B747200F_CL\TEXTURE.2\


    Next time when you start FSX, the aircraft should be visible in the aircraft selection list and work fine. If you download additional liveries, you can make thumbnail images yourself: you need to make a screenshot of each livery of the aircraft and resize it to 256x128 pixels (use an image editor like photoshop, paintshop or whatever you prefer). Make sure the image format is JPG and name each of them "thumbnail.jpg". Then copy the image to each texture folder inside the aircraft folder.

    There are no comments for this aircraft

    Add a Comment

    Your name

    Your E-Mail

    Comment

    Formatting:
    [b]bold[/b], [i]italic[/i], [u]underline[/u], [url]https://www.yoursite.com[/url]

    Rate this file

    Lowest Highest